| POWERFUL |
| Pumping capacity (in gallons per hour at a 10-ft. height): |
|
|
| Main Pump |
3540 GPH |
3100 GPH |
| Backup Pump |
1850 GPH |
1000 GPH |
| Approximate hours of pumping with a Basement Watchdog Battery: |
|
|
| Big Standby Battery |
60 hours* |
100 hours* |
| Emergency Standby Battery |
Not recommended |
50 hours* |
| Maintenance Free/AGM Standby Battery** |
48 hours* |
80 hours* |
| Runs intermittently for days on a single charge |
 |
|
| Charger strength (the higher the amps, the faster it will recharge the battery) |
1.6 amps |
0.4 amps |
| AUTOMATIC |
| Switches automatically to battery power when AC power fails |
|
|
| Pumps automatically when water volume exceeds the capacity of the main AC pump |
|
|
| Recharges automatically when power is restored |
|
|
| Monitors battery and power conditions constantly |
|
|
| Charges the battery, then the charger shuts off to extend the life of the battery |
|
|
| Runs the pump weekly to ensure it is working properly |
|
|
| VERSATILE |
| Accommodates maintenance or maintenance free (AGM) batteries |
|
|
| Connect two batteries to further extend the run time of the system |
|
|
| MONITORING |
| Detects irregularities, sounds an alarm, and pinpoints problems and solutions on the control panel |
|
|
| REMOTE NOTIFICATION |
| USB data port to connect to the Basement Watchdog WiFi or Home Automation Module |
|
|
| Remote terminal for connection to a security system, auto dialer or other device |
|
|
| AUDIBLE AND VISUAL ALARMS |
| Battery needs water |
|
|
| Battery is old and needs to be replaced |
|
|
| Battery is discharged or defective |
|
|
| Battery cable is loose or terminals are corroded |
|
|
| Power, fuse or circuit breaker has failed |
|
|
| Pump has been activated, check the main pump for failure |
|
|
| The alarm can be silenced during a power outage |
|
|